Impulse Modena RacingWorkJul – Oct 2024

Motorcycle Steering Damper Design and Testing

Fitted an oversized steering damper within the MotoStudent rules and the space available: double support design, multibody model in MSC Adams and workshop tests of the damper, up to a part that worked reliably on track.

MSC AdamsSiemens NX

A damper too big for the bike

The bike needed a steering damper, but the only unit within budget was oversized and clashed with the fork and the steering plate. The task: a mounting that respected the MotoStudent rules and still gave the steering enough stability.

A steering damper on the steering plate
A steering damper on the steering plate

Two divisions, one design loop

We chose a double support between the frame and the left fork. A teammate drew it in Siemens NX on the full front-end assembly; with another colleague I moved it into MSC Adams and built the multibody model with the mass properties from the CAD. Every time the Structures division changed the supports for stiffness or stress, we updated the dynamic model.

I coordinated this loop and led the workshop tests that measured the force–velocity curve of the damper, which then went into the Adams model.

1 / 3 · Mounting geometry between frame, fork and steering plate
2 / 3 · First hand calculations of the damper response
3 / 3 · Multibody model of the front end in MSC Adams
1 / 3 · Mounting geometry between frame, fork and steering plate

Oscillations gone in time

Across the input frequencies checked, the model showed the steering oscillations dying out within the required time. The supports were manufactured without fitting problems, and the damper worked reliably on track.

Steering angle after a disturbance: the oscillation decays
Steering angle after a disturbance: the oscillation decays
Working on multibody models or chassis components?

Book a call: the calendar opens right here.

All projects